EasyRider 3.20
======================================================================
E a s y R i d e r powered by >>>>> http://www.easyrider.ch.pn <<<<<
======================================================================
+ embedded gCam
+ multicam support (betacrypt, cryptoworks, conax, viaccess)
+ card sharing via gbox-SSSP
+ pcmcia compactflash support
======================================================================
This version is not for public, it is an internal beta version and
contains bugs. You can use it for testing and give it to friends of
your confidence, but don't put this version on various upload centers
and don't discuss on public boards.
DISCLAIMER
======================================================================
This software is for educational purposes only.
It shouldn't be used to ilegally watch TV channels.
======================================================================
Hardware Requirements
=====================
Galaxis McZap, Matrix, IQs, Matrix Action, Easy, Pop, Hirschmann,
Axis, Classic, TechnoTrend TT-micro S200, Premiere TV-Pilot 100,
hauppauge dec 3000s or any compatible receiver with TI AV 711xx.
Installation
============
+ Flash Erase (*)
+ Keyfile
+ Settings (*)
+ Firmware
(*) In case of first install via rs232 save settings and erase flash.
For flash erase, saving settings and bootloader have a look at
google and search for "pl_galaxis".
Version 3.0 or higher supports fast simple Firmware- and Settings-
flashing via compactflash-card.
Cardsharing
===========
EasyRider can be used in emulation- or share-mode via SSSP (=Simple
Serial Sharing Protocol). This Protocol defines the communication
between dvb-box and a gbox by using RS232 (serial/com/tty port).
For cardsharing activate "cw-share" in the tools menu of the firmware.
When configuring cw-share take care in using debug-mode. Only use in
case of searching errors to avoid redundant datatransfer on rs232 port.
serial port configuration for e.g. router like WR850G V2
--------------------------------------------------------
115200 8N1 (baudrate: 115200, data bits: 8, parity: none, stop bit: 1)
gbox-RS232 communication settings
---------------------------------
To activate add in the gbox_cfg
R: { 01 } for com1, or R: { 02 } for com2
W: and V: should be deactivated 00 00
EMULATIONS
==========
+ irdeto
+ beta digital
+ seca
+ viaccess, tps
+ nagravision
+ cryptoworks
+ constant cw
+ biss
+ conax
ECM-Tracer (caid/pid logger)
============================
EasyRider contains also an ecm-tracer (CaID/PID Logger).
To start tracing activate the ecm-trace and for additional information
also the debug-mode in the tools menu.
EMM-Blocker
===========
The integrated emm-blocker can be activated in the tools menu.
D0, D2 and D3's will be blocked.
THX2@LL
=======
thanks to all for patience, spending time for tests, cooperation work
and nerves.
thanks also to the developers of external tools and gbox through which
cardsharing with galaxis compatible dvb-boxes has become possible.
VERSION-HISTORY
======================================================================
3.20
----
+ viaccess embedded
+ gCam bugfixes
+ cf-card bugfixes
+ multicam support (betacrypt, cryptoworks, conax, viaccess)
======================================================================
3.19
----
+ bugfix secret hangup / freezer
+ new secret keys (polsat ok)
======================================================================
3.18
----
+ top secret
======================================================================
3.17
----
+ RC5 support bugfix
+ alpha display driver
+ polsat back again (reset your keys with FF FF FF FF ....)
======================================================================
3.16
----
+ bugfix for white cards (multifeed problems)
+ better card / gCam handling
+ nagra2 part optimized
+ Modified ECM 0x60 implemeted (pw)
+ cryptoworks 80-keys extracted to cf (Czechlink, Slovaklink, Turner)
======================================================================
3.15
----
+ linear channel scan implemented (use "satellites.er" on cf-card)
satellites.er can be converted from satellites.xml with EasyRider
MultiTool v1.03
+ bugfix key search const cw
======================================================================
3.14
----
+ bugfix orf cryptoworks
+ 8 digit alphanum display driver implemented (only for test)
+ rc5 support configure via setup-settings-remote control
(boot after switching on. after that simply use your remote control)
======================================================================
3.13
----
no version !
======================================================================
3.12
----
+ bugfix: tps.bin & aes.txt
+ support for rc5-remote-control with adress 0x0001
+ support for hauppauge dec 3000s
+ n2 AU
======================================================================
3.11
----
+ display banner
+ remote control configuration (frezzer or ca-modul via bookmark)
+ cf/ci combination bugfix & optimizing
+ conax
+ TPS
info: !!! use only humax compatible tps.bin !!!
!!! don't flash bin-file into the box !!!
!!! just copy bin-file to your cf-card !!!
======================================================================
3.10
----
+ KD
======================================================================
3.09
----
+ bugfix Keymanager
+ bugfix nagra1
+ bugfix 4mb boxes cf-flashing
INFO: 4mb flash-boxes have to flash this version via rs232
versions > 3.09 can be flashed via cf-card
======================================================================
3.08
----
+ bugfix TPS
======================================================================
3.07
----
+ arena card (now working fine)
+ cw-share bugfix (smartcard priority)
+ biss
======================================================================
3.06
----
+ keyfiles have now extension .TXT
+ place your own startlogo
(JPEG, max. 65535 bytes, resolution: 310x168, flashadress: 2c030000)
======================================================================
3.05
----
+ save valid aes key
======================================================================
3.04
----
+ bugfix TPS
======================================================================
3.03
----
+ bugfix cryptoworks
+ flash erase via cf-card
======================================================================
3.02
----
+ bugfix aes pool encryption (now working fine)
======================================================================
3.01
----
+ bugfix cf-files reading
+ bugfix channel scan (HDTV hangup)
+ bugfix aes pool encryption
+ IPK change for arena card
======================================================================
3.00
----
+ arena card support for multicam
+ card sharing via SSSP and gbox
+ pcmcia compact flash-card support
+ gCam key-extraction (more flex)
all keys extracted from firmware (rsa, system, boxkey, aes ...)
+ loading keys from compactflash-card
+ AES pool encryption
+ bugfix nagra keyselect
+ bugfix sex view via constant cw (vpid problem)
+ settings-, firmware-update via cf-card
+ 5000 channels, 1000 transponder possible
0x2C010000 - 0x2C02FFFF ... premiere channels
0x2C050000 - 0x2C057FFF ... transponders
0x2C058000 - 0x2C0977B0 ... channels
+ new defined sat:
Atlantic Bird 1 12,5°W
Telecom 2c 3,0°E
Hellas Sat 2 39,0°E
Express AM 1 40,0°E
+ bugfix sat:
Turksat 1C 42°E
Eutelsat W2 16°E
Eutelsat W1 10°E
Eutelsat W3 7°E
Telecom 2C 5°W
======================================================================
2.01 Patch 1
------------
+ bugfix channel deadlock
======================================================================
2.01
----
+ N2 provid 0101, 0901, 0501 (Dish, Bell, PW)
======================================================================
2.00
----
+ bugfix cryptoworks
+ K01 for nagra and cryptoworks
======================================================================
1.08
----
+ cryptoworks
+ gCam bugfixes
======================================================================
1.07
----
+ bugfixes: vpid
======================================================================
1.06
----
+ bugfixes: favorit lock, sleeptimer, constant cw search,
slow favorit list
======================================================================
1.05
----
+ beta, conax, cryptowoks embedded, gCam 2.23
+ smartcard au [on/off], on=card priorityoff=gCam priority
+ cw-card powering up from 3.5MHz to 4.5MHz
+ multicam support (2nd cardreader for bc, cx, cw)
+ bc reset for not working cards
+ sleep timer
+ polsat
======================================================================
1.04
----
+ nagra1 bugfix
+ gCam-service info
======================================================================
1.03
----
+ channel scan bugfix
+ tv-format bugfix
======================================================================
1.02
----
+ tuner: ALPS, SAMSUNG, PHLIPS, QUAM added
+ tv, tv+radio channel scan bugfix
INFO: please test channel scan and beta chip cam (on/off)again
======================================================================
1.01
----
+ diseqc 1.2 rotor via antenna menu
+ ac3, tv format, tuner, epg optimized
+ textshadow via osd
+ beta chip cam (on/off) (off = for defect beta chip -> FTA)
+ bugfix ca-modul menu
+ pw, fullx ci-modul support implemented
+ euro1080, hdtv video stream-blocker embedded
+ gCam 2.22 (bugfix tps, tv cabo (some packages))
======================================================================
1.00n
-----
+ bugfix pin code boot
+ bugfix eeprom detection
+ provid 0401,4001,4801 added
+ bugfix tv format
======================================================================
1.00m
-----
+ bugfix pin code for epg and booting
+ bugfix slow navigation list
+ emm blocker (D0, D2, D3)
======================================================================
1.00k
-----
+ macrovision, modem, telecontrol disabled
+ software download via SAT disabled
+ 1mb RAM optimized
+ ac3 task optimized
>>> please reset AES key for prov 007C00 <<<
======================================================================
1.00j
-----
+ Turksat 1C 42°E sat-scan
+ seca1
======================================================================
1.00i
-----
+ embedded keys deleted
+ KeysCleaner via KeyManager
+ bugfix ci-modul messages
======================================================================
1.00h
-----
+ cw-share timing bugfix
+ via bugfix (rtv...)
======================================================================
1.00g
-----
+ TPS Multivision
+ AES key edit via KeyManager
+ via provider 3 digits
+ keytable expanded [0x2c042000-0x2C044FFF]
+ via prov 0x010C40, nagra prov 0x2201,0x2301,0x1811,0x1911
+ bugfix cw-share & back again !!!
======================================================================
1.00f
-----
+ auto nv-list (channel-scan on/off)
+ bugfix cw-share
+ cryptoworks constant cw's
======================================================================
1.00e
-----
+ automatic channel-scan disabled
+ VIA2 RTV 13E (ProvId:0x01AC)
======================================================================
1.00d
-----
+ SRG Swiss 13E
+ boot optimze
+ cryptoworks embedded
======================================================================
1.00c
-----
+ VIA1 and VIA2
provid
TPS France 13E 0x0150
TPS France 13E 0x007C
MTVNetworks 19E 0x0055
CFi-MCM 13E,5W 0x0074
CSN/UPC TV 0x0078
FTCable 13&19E 0x0080
MCM Europe 13E 0x0084
SRG Swiss 13E 0x0094
BBC Prime 13E 0x00A0
TV Slovenia 13E 0x00B0
EuroSport 13E 0x011C
Canal+ Fr. 19E 0x008C
======================================================================
1.00b
-----
+ bugfix KeyManager
+ TPS Multivision
======================================================================
1.00a
-----
+ ecm's and cw's via rs232
+ gCam
+ ecm-tracer
+ debug mode
+ KeyManager and embedded key-update
======================================================================